Velleman HAA2801 - Manual (Page 24)

FEATURE PROGRAMMING -- KEY IN AND STORE THE DESIRED VALUES
The feature values can be set and stored into the system one by one with the desired Programming
Locations. Programming can be made continuously and it is not necessary to be in sequence order.
Just go to the desired programming location and key in the value for the desired feature.
IMPORTANT NOTE --- Programming Criteria for Codes:
a) The Prime Codes:
All the Private User PINs, Master Code, Duress Codes, Super User PIN, Common User Codes and
the Visitor User Codes belong to Prime Codes in the system. They have the priority to be read and
they MUST be unique and can not be repeated in the programming. A Prime code also can NOT be
duplicated for Secondary code to work with the EM Card or vice versa.
b) The Prime Cards:
All the EM Cards used in this system are Prime Cards. The cards used for the Outputs 1, 2 and 3
MUST be unique and can not be repeated use for different Outputs in the programming. The Card
always has the priority to be read when working in “EM Card + Secondary PIN” or "EM Card +
Common User PIN”.
c) Warning for A Repeated Use of Prime Code or Card:
One long beep is given if a Code/PIN is keyed in or a Card is read. It means that a Prime Code or a
Prime Card is repeated. The Code/PIN or Card was already in one of the PIN or Card Locations or
IDs. The programming is invalid. Change a new Code/PIN or Card and program it again.
d) Secondary User PINs:
The Secondary User PINs are prepared to enhance security. It is put after a Card in “ EM Card +
Secondary User PIN” programming. They can be a repeated code within the Secondary PINs but it
is NOT allowed a duplicate of the Prime Codes. The system will reject a duplicated Prime Code for
Secondary User PIN or vice versa.
e) Getting Advantages from The Secondary User PINs:
The repeated Secondary PINs can be used as a Group Common User Code or called Department
User Code for a group of EM Cards, which simplifies the programming of using large number of
different User PINs. EM Card with Department Code prevents a lost card used by people of other
department. Also, it will be easier to trace out the department of the lost card belongs to. Of cause, the
owner can use a proprietary Secondary User PIN for each EM Card in the “ EM Card + Secondary
User PIN” programming to further increase the security if it is the main concern.
f) Security Level Comparison of The Secondary User PIN/Code following Card Reading:
i)
ii)
iii)
NOTE:
Each EM Card is a Prime card and it has the priority to be read. The system provides the proprietary
Wiegand Data output from each card only. The Secondary PIN/Code following the card reading does
not affect the ID of the Card in the Wiegang Data.
g) Make A List Recording of The User Names VS User Codes:
Suggest the owner to make a list recording of the User Names corresponding to the Codes/PINs/
Cards that are going to store in the Locations and the IDs before the programming. It will be a useful
tool for the owner to easily program them smoothly and also to trace them from this multi-users system
in the future.
Example: (Please see the following page)
24
EM Card + Common User Code --- All EM Cards use the same User Code. Security level is
better than just Card only. A lost Card picked up by any people can be used if he knows the
Common User Code.
EM Card + Department User Code --- The EM Cards are divided into groups with a Department
User Code. A lost Card can be used only by the people in the same group who know the
Department Code.
EM Card + Secondary User PIN --- Each EM Card has its own proprietary User PIN. A lost Card
can not be used by other people.