Banks Power 2001-2005 Chevy_GMC 6.6L Duramax Turbo-Diesel Pickups - Manual (Page 24)

24
96452 v.11.0
If the Six-Gun Diesel Tuner has been
moved to a different vehicle, or you
are instructed to do so by Banks
Technical Staff, it is possible to reset
all of the parameters that the Six-Gun
has ‘learned’ - presence of an EGT
thermocouple or Speed-Loader, etc.
CAUTION: The following procedures
can only be carried out with the
engine OFF!
1.
Turn the vehicle key to ON but DO
NOT start the engine.
2.
Fully depress the throttle pedal and
then release it completely. Repeat 5
times. The GREEN LED will flash when
this is completed successfully.
3.
Turn the key OFF. Wait 30 seconds,
or until the GREEN LED goes off and
stays off. Turn the key back to the ON
position but DO NOT start the engine.
4.
Fully depress the throttle pedal and
then release it completely. Repeat 5
times.
-END, SEcTION 9-
Section 9
CLEARING LEARNED INFORMATION
Section 10
Updating Your Banks PowerPDA Software & Banks Six-Gun Diesel Tuner
Firmware
The Banks PowerPDA is designed
such that new software updates
can be easily installed. check the
BanksPower web site at <http://
www.bankspower.com/down-
loads> for the latest version of the
Banks PowerPDA software. Once you
have determined that your Banks
PowerPDA should be updated, follow
the instructions on the page for the
appropriate software update.
The Banks Six-Gun Diesel Tuner is
designed such that new firmware
updates can be easily installed. check
the BanksPower web site at <http://
www.bankspower.com/down-
loads> for the latest version of the
Banks Six-Gun Diesel Tuner firmware.
Once you have determined that your
Banks Six-Gun Diesel Tuner should be
updated, follow the instructions on
the page for the appropriate firmware
update.
END, SEcTION 10-