Video proc, Video proc -10, Table 3-2 i – Cobalt Digital COMPASS 9084 HD_SD-SDI RGB Color Corrector User Manual
Page 36: Table 3-2, 9084 function submenu list and descriptions
3
9084 Function Submenu List and Descriptions
3-10
9084 PRODUCT MANUAL
9084-OM (V4.4)
Table 3-2
9084 Function Submenu List
Provides the following Video Proc parametric controls.
• Video Proc
Video Proc (On/Off) provides master on/off control of all Video Proc
functions.
• When set to Off, Video Proc is bypassed.
• When set to On, currently displayed parameter settings take effect.
• Reset to Unity
Reset to Unity provides unity reset control of all Video Proc functions.
When Confirm is clicked, a Confirm? pop-up appears, requesting
confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
• Luma Gain
Adjusts gain percentage applied to Luma (Y channel).
(0% to 200% range in 0.1% steps; unity = 100%)
Video Proc
• Luma Lift
Adjusts lift applied to Luma (Y-channel).
(-100% to 100% range in 0.1% steps; null = 0.0%)
• Color Gain
Adjusts gain percentage (saturation)
applied to Chroma (C-channel).
(0% to 200% range in 0.1% steps; unity = 100%)
• Color Phase
Adjusts phase angle applied to Chroma.
(-360° to 360° range in 0.1° steps; null = 0°)
• Gang Luma and Color Gain
When set to On, changing either the Luma Gain or Color Gain controls
increases or decreases both the luma and chroma levels by equal
amounts.
• Black Hard Clip
Applies black hard clip (limiting) at specified percentage.
(-6.8% to 50.0%; null = -6.8%)