Color correction, Color correction -13, Operating instructions – Cobalt Digital COMPASS 9084 HD_SD-SDI RGB Color Corrector User Manual
Page 39: 9084 function submenu list and descriptions
9084-OM (V4.4)
9084 PRODUCT MANUAL
3-13
Operating Instructions
9084 Function Submenu List and Descriptions
Provides color corrector functions for the individual RGB
channels of the received SD/HD SDI signal.
• Color Corrector
Color Corrector (On/Off) provides master on/off control of all Color
Corrector functions.
• When set to Off, all processing is bypassed.
• When set to On, currently displayed parameters settings take effect.
• Reset to Unity
Reset to Unity provides unity reset control of all Color Corrector
functions.
When Confirm is clicked, a Confirm? pop-up appears, requesting
confirmation.
• Click Yes to proceed with the unity reset.
• Click No to reject unity reset.
• Black Adj. (Green – Red – Blue)
Separate red, green, and blue black level controls respectively apply lift
value for R, G, and B channels.
(-100.0 to 100.0% range in 0.1% steps; null = 0.0)
Color Correction
• Gang Black Level Controls
When set to On, changing any of the Black Adj. controls increases or
decreases R, G, and B black levels by equal amounts.
• White Adj. (Green – Red – Blue)
Separate red, green, and blue gain controls respectively apply gain
percentage for R, G, and B channels.
(0.0 to 200.0% range in 0.1% steps; unity = 100.0)
• Gang White Level Controls
When set to On, changing any of the White Adj. (gain) controls increases
or decreases R, G, and B gain levels by equal amounts.
Table 3-2
9084 Function Submenu List — continued