Cobalt Digital COMPASS 9084 HD_SD-SDI RGB Color Corrector - Manual (Page 54)

3
Troubleshooting
3-28 9084 PRODUCT MANUAL 9084-OM (V4.4)
9084 Card Edge Status/Error Indicators and Display
Figure 3-10 shows and describes the 9084 card edge status indicators and
display. These indicators and the display show status and error conditions
relating to the card itself and remote (network) communications (where
applicable). Because these indicators are part of the card itself and require no
external interface, the indicators are particularly useful in the event of
communications problems with external devices such as network remote
control devices.
Figure 3-10 9084 Card Edge Status Indicators and Display
9084
4-Character Alphanumeric Display
RM
T
REF ERR 1
080
72
0
62
5
52
5
Input Format
Indicators
Status/Error
Indicators
Item Function
Alphanumeric
Display Displays 4-digit alphanumeric code indicating status or errors as follows:
• E0XX: Video Errors
• E002: Video Acquiring Lock
• E2XX: Frame Sync Errors
• E200: Reference is Incompatible with Input Video
• E201: Reference Standard is Invalid/No Reference Present
• E202: Reference Standard is 720p2398 (a reference standard not supported by the framesync)
• E203: Reference Standard is 720p2997 (a reference standard not supported by the framesync)
RMT LED Blue LED flashes when 9084 is receiving control message from remote network control (e.g., DashBoard™
or Cobalt
® Remote Control Panel)
REF LED Blue LED illuminates indicating 9084 is receiving valid reference when set up for framesync operation.
ERR LED Red LED illuminates when 9084 unable to lock to framesync, or unable to lock to input standard.
Input Format
LEDs Four blue LEDs indicate the input signal raster format being received and locked onto by the 9084 (1080,
720, 625, 525). Continuous cycling of the LEDs indicates the 9084 has not locked onto a particular format (as
in the case of no signal input).