Cobalt Digital COMPASS 9066 Upconverter - Manual (Page 37)

9066-OM (V4.5) 9066 PRODUCT MANUAL 2-5
Installation and Setup
Installing a Rear I/O Module
Figure 2-2 Rear I/O Module Installation
DSCN3483A.JPG
Align and engage mounting tab on Rear
I/O Module with the module seating slot
on rear of frame chassis.
Hold top of Rear I/O Module flush against
frame chassis and start the captive screw.
Lightly tighten captive screw.
DSCN3487A.JPG
Note: Rear I/O Modules RM20-9066-C thru RM20-9066-F occupy
two rear module slot mounting locations and use two captive
screws.
Rear I/O Module RM20-9066-G occupies three rear module
slot mounting locations and uses three captive screws.
1
2