9066 function submenu list and descriptions – Cobalt Digital COMPASS 9066 Upconverter User Manual

Page 74

Advertising
background image

3

9066 Function Submenu List and Descriptions

3-32

9066 PRODUCT MANUAL

9066-OM (V4.5)

(continued)

• SD Audio Depth

Allows option of using 24-bit audio data structure per SMPTE 272M,
§3.10 (default is 20-bit per SMPTE 272M, §3.5).

Note: • If 24-bit depth is desired, make certain downstream equipment is

compatible with 24-bit SD audio data.

• Depth control setting applied here affects both Embedded Audio

Group 1/2 and 3/4.

• Group Enable

When enabled (On), enables the embedding of the corresponding
embedded audio group (Embedded Audio Group 1 or Embedded Audio
Group 2).

• Embedded Audio Group 1 consists of embedded channels 1 thru 4.

• Embedded Audio Group 2 consists of embedded channels 5 thru 8.

Two Group Enable buttons correspondingly enable or disable Embedded
Audio Group 1 and Embedded Audio Group 2.

Disabling a group removes the entire group of embedded audio channels
while preserving the settings of the channels belonging to the group.

Note:

Embedded Ch 2 thru Embedded Ch 8 have controls identical to the Source, Gain, Mute, and Phase controls
described here for Embedded Ch 1. Therefore, only the Embedded Ch 1 controls are shown here.

For each channel, its source and destination should be considered and appropriately set. Unused destination
channels should be set to the Silence selection.

• Embedded Channel Source

Using the Source drop-down list, selects the audio input source to be
embedded in the corresponding embedded channel from the choices
described below.

• Embedded Ch 1 thru Ch 16 as Source

Embed Ch 1 thru Embed Ch 16 range in Source drop-down list enables
an embedded channel (Ch 1 thru Ch 16) to be the source for the selected
destination Embedded Audio Group channel.

(In this example, Embed Ch 1 (embedded Ch 1) is the source for
destination Embedded Ch 1)

• AES Ch 1 thru AES Ch 16 as Source

AES Ch 1 thru AES Ch 16 range in Source drop-down list enables a
discrete AES channel (Ch 1 thru Ch 16) to be the source for the selected
destination Embedded Audio Group channel.

(In this example, AES Ch 1 is the source for destination Embedded Ch 1)

Table 3-2

9066 Function Submenu List — continued

Advertising