Cobalt Digital COMPASS 9066 Upconverter - Manual (Page 48)

3
Accessing the 9066 Card via Remote Control
3-6 9066 PRODUCT MANUAL 9066-OM (V4.5)
Accessing the 9066 Card Using a Cobalt ® Remote Control Panel
Press the Select Device key and select a card as shown in the example below.
Card Access/Navigation
Tree Pane
Card Info
Pane
Card Function Submenu
and Controls Pane
9066_DB_ACCESS_V4.PNG
This display shows the list
order number of the device that
is ready for selection
This display shows the devices assigned to the Control Panel.
• Rotate any knob to select from the list of devices. The device selected using a knob
is displayed with a reversed background (in this example,
“1 9066 - Receiver 21 Input Processing”).
• Directly enter a device by entering its list number using the numeric keypad, and
then pressing Enter or pressing in any knob).
3366_3392.JPG