Rainbow Electronics T89C51CC01 - Manual (Page 93)

93
T89C51CC01
Rev. D – 17-Dec-01
Table 49. CANIE2 Register
CANIE2 (S:C3h)
CAN Enable Interrupt message
object Registers 2
Reset Value: 0000 0000b
Table 50. CANBT1 Register
CANBT1 (S:B4h)
CAN Bit Timing Registers 1
Note: The CAN controller bit timing registers must be accessed only if the CAN controller is dis-
abled with the ENA bit of the CANGCON register set to 0.
See Figure 35.
No default value after reset.
7 6 5 4 3 2 1 0
IECH 7 IECH 6 IECH 5 IECH 4 IECH 3 IECH 2 IECH 1 IECH 0
Bit
Number
Bit
Mnemonic Description
7-0 IECH7:0
Enable interrupt by message object
0 - disable IT.
1 - enable IT.
IECH7:0 = 0b 0000 1100 -> Enable IT’s of message objects 3 & 2.
7 6 5 4 3 2 1 0
- BRP 5 BRP 4 BRP 3 BRP 2 BRP 1 BRP 0 -
Bit
Number
Bit
Mnemonic Description
7 -
Reserved
The value read from this bit is indeterminate. Do not set this bit.
6-1 BRP5:0
Baud rate prescaler
The period of the CAN controller system clock Tscl is programmable and
determines the individual bit timing.
0 -
Reserved
The value read from this bit is indeterminate. Do not set this bit.
Tscl =
BRP[5..0] + 1
Fcan