Peerless-AV ACC925 - Installation - Manual (Page 8)

8 of 9 ISSUED: 11-19-08 SHEET #: 120-9062-3 06-29-12
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Attaching Adapter Plate to Screen with VESA ® Mounting Pattern
2
Mounting Patterns
VESA ® 200 x 100 VESA ® 200 x 200 VESA ® 100 x 100
VESA ® 200 x 100 VESA ® 200 x 200 VESA ® 100 x 100
Choose hole pattern as shown in detail 1 for VESA mounting pattern. Begin with the shortest length screw, hand
thread through adapter plate into screen as shown in detail 2. Screw must make at least three full turns into the
mounting hole and fi t snug into place. Do not over tighten. If screw cannot make three full turns into the screen,
select a longer length screw from the fastener pack. Repeat for remaining mounting holes. Securely tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
If you have any questions, please call Peerless customer care at 1-800-865-2112.
ADAPTER
PLATE
SCREEN
SCREEN SCREEN
DETAIL 1
DETAIL 2
NOTE: For screens
with a hole pattern in
a pocket, spacers go
between adapter plate
and screen.