R&M Materials Handling WIRE ROPE PACKAGES - Manual (Page 24)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
24/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
3.4 Machinery size 2, 8 wheels
Pos. Name Specification Amount
1 End truck 2
2 Washer 6DIN9021-A3G 3+3
3 Socket head cap screw M6x40 DIN912-8.8-A36 3+3
4 Traveling machinery 2
• Clean splines and mounting flanges from dirt and rust protection wax and grease the shaft lightly
before assembly.
• You can use a plastic hammer to slide drive in. Do not use any metal or lead hammer.
• Tightening torques M6-8.8: 9 Nm