R&M Materials Handling WIRE ROPE PACKAGES - Manual (Page 43)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
43/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
7.2 Double girder crane (Wire rope hoist)
3 4 5
1
3
4
2
5
1
2
Name Specification Amount
Fixing bridge panel; Position 1
Fixing plate
CQP-L81W50H58T8 4/6/8
Screw (Thread locking) DIN913-M8x20-8.8-A3G 4/6/8
Washer DIN9021-8-A3G 4/6/8
Nut DIN985-M8-8-A3G 4/6/8
Fixing c-rail; Position 2
C-rail KC-020276
2
Nut; Square CQ-W25T6L45 10/12/14
Screw DIN933-M8x25-8.8-A3G 8/10/12
Screw DIN933-M8X70-8.8-A3G 2
Washer DIN125-A8-A3G 8/10/12
Washer QA-D9D36D5 4
Track support KC-024122 2
Fixing angle bars Position 3 4/5
Fixing plate QA-L90W40H45T10 2 2 2
Screw DIN933-M8X45-8.8-A3G 2 2 4
Screw DIN933-M8X50-8.8-A3G - 2 -
Screw DIN912-M8X25-8.8-A3G 4 2 4
Washer DIN125-A8-A3G 12 12 16
Nut DIN985-M8-8-A3G 6 6 8
Note! Amounts are case-specific. They vary by number and type of bridge panel(s) and amount of
vertical c-rails required.
Note!
Positions 4 and
5 are alternative
fixing types.