R&M Materials Handling WIRE ROPE PACKAGES - Manual (Page 25)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
25/76
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
4 Crane towing arm assembly
4.1 Crane Towing Arm
13 11 7 8 12 14
4
9
3
10
1
5 6
2
15
c-vr-lb
Pos. Name Specification Fixing variation Amount
1 Towing arm CQW-L558 A & B 1
2 Towing arm CQP-L195W120H135 A & B 1
3 Tube CQ-L1500W50H50T2 A & B 1
4 Fixing Plate CQP-L80W80H6 A & B 4
5 Fixing Plate (option) CQP-L150W105H6 B 1
6 C-Profile (option) CQP-L500W50H120 B 1
7 Screw DIN933-M10x20-8.8-A3G A & B 4
8 Screw DIN933-M10x35-8.8-A3G B 4
9 Screw DIN931-M8x80-8.8-A3G A & B 4
10 Screw DIN931-M8x140-8.8-A3G A & B 4
11 Washer DIN125-A10-A3G A / B 4 / 12
12 Washer DIN125-A8-A3G A & B 16
13 Nut DIN985-M10-8-A3G B 4
14 Nut DIN985-M8-8-A3G A & B 8
15 Towing arm (option) * CQP-L440W41H80 A & B 1
A) Fixing variation with direct connection to end carriage. When conductor rail power supply type is used either part number 2 or its
fixing parts won’t be needed. It will not matter to the place of the end carriage where the towing arm is attached if the power supply
is flat cable- or the conductor rail type. The cranes towing arm is fixed by the part number 7 to the end carriage.
B) Variation with the optional fixing part (part number 6).
• If necessary cut off excess length of square tubes.
• There will be several attaching possibilities in the end carriage for the towing arm. Choose the
best suited for the case.
• Notice the differences between variations in the part list.
* For assembly use either Towing arm part no 2 or 15 (alternative parts).