Buyers 1501100 - Manual

Quality since 1946
13
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Installation Instructions
1501100
Ladder Rack
—continued inside
WARNING
It’s important to follow the provided step-by-step
instructions. Failure to do so may result in severe or fatal
injury and or property damage.
Before assembling:
Before assembling your Buyers ladder rack it’s
important to read, understand, and follow all listed
instructions.
Note: There are two different assembly options,
depending on whether the ladder rack will
be mounted on a short or long bed truck. The
difference between the two is how the front half
of the rack is assembled. Detailed instructions
for both options have been provided. Failure
to choose the correct option for your bed size
will result in disassembling the ladder rack
and starting over. The rear half of the rack is
universal, and is assembled in one manner,
regardless of bed size.
Safety Instructions/Warnings:
• Your Buyers ladder rack is rated at 1,000 lbs. Do
not exceed this limit for any reason.
• All loads must be evenly balanced and
distributed over as many crossbars as possible.
• The removable rear crossbar must be attached
and pinned to the rack before cargo can be
loaded and secured. Do not carry cargo on the
ladder rack with the rear crossbar removed.
• Be sure that all hardware is securely tightened
once ladder rack is assembled and mounted to
the truck.
• Check for loose, worn, or missing hardware
before each use. Tighten or replace hardware as
needed
required Tools:
• Safety Glasses
• Gloves
• Adjustable Wrench
• Socket Wrench Set
• Hex Wrenches
• Rubber Mallet
• Tape Measure
Surface Finish Maintenance:
• Your Buyers ladder rack has a powder coat finish
and can be kept clean by using a soft sponge or
cloth with mild soap and water.