SENA Parani-SD100-200 - Manual (Page 11)

11
Figure Error! Style not defined.-2 The panel layout of Parani-SD200
2.2. Connecting the Hardware
This section describes how to connect the Parani-SD Series to the serial device.
- Connect a power source to the Parani-SD Series.
- Connect the Parani-SD Series to a serial device.
2.2.1. Connecting Power to Parani-SD
Connect the power jack to the power connector of the Parani-SD Series using the DC power adapter,
USB power cable or DC power cable that is included in the package. If power is properly supplied, the
[Power] lamp will display a solid green color.
Figure Error! Style not defined.-3 Connecting Power to Parani-SD200