SENA Parani-SD100-200 - Manual (Page 8)

8
1.3. Product Specification
Parani-SD100 Parani-SD200
Serial Interface One female DB9 serial port for data communication
Serial speeds 1200bps to 230400bps
Flow Control: None, Hardware (RTS/CTS)
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND, DCD
Bluetooth v1.2
*
Protocol: RFCOMM, L2CAP, SDP
Profile: Serial Port Profile
Class 1
Class 2
Level: 18dBm Level: Max. 4dBm
Bluetooth Interface
Working distance:
Default–Default Antenna 100m
Default–Dipole Antenna 150m
Dipole–Dipole Antenna 200m
Patch–Dipole Antenna 400m
Patch–Patch Antenna 1000m
Working distance:
Default–Default Antenna 30m
Default–Dipole Antenna 50m
Dipole–Dipole Antenna 80m
Patch–Dipole Antenna 150m
Patch–Patch Antenna 300m
Configuration ParaniWIN, Modem AT command set
Firmware Update ParaniUpdater
Diagnostic LED Power
Standby
Connect
Serial Rx/Tx
Supply voltage: 5V ~ 12V DC
Supply current
- Parani-SD100 : minimum 300mA
- Parani-SD200 : minimum 150mA
Nominal power consumption
- Parani-SD100 : 60mA@9600bps, 81mA@115Kbps
- Parani-SD200 : 58mA@9600bps, 66mA@115Kbps
Power
Common Power supply options:
Power via a standard AC-plug DC-adapter
Power via USB power cable
Power via DC power cable
Power via pin 9 of DB9 connector
Battery Pack for Parani-SD200 only
Battery Usage Time When using battery pack for Parani-SD200
- Typical 1.5V –AA alkaline batteries (2500mAh)
Avg. 11hr@9600bps
Note : Depending on the batteries and its usage environment greatly
determines how long the Parani product will last for their application, i.e.
battery storage, battery capacity, battery brand and so on.
Environmental Operating temperature: -10 ~ 55
o
C
Storage temperature: -20 ~ 70
o
C
Humidity : 90% (Non-condensing)