Figure 3 - install water pump – Billet Specialties V-Trac Pulley System - Small Block Chevy User Manual
Page 6
Advertising
TECH LINE: 708-588-0505 FAX 708-588-7181 www.billetspecialties.com
Figure 3 - Install Water Pump
Install water pump onto studs (make sure O-rings are still seated).
Apply anti-seize to exposed stud threads. Thread the three 2-11/16 spacer
nuts onto the short studs with the hex end out.
Thread the remaining 1-7/8” spacer nut to the passenger side bottom stud.
Tighten all spacer nuts firmly at this time. Also tighten lower 3/8” cap screws
on alternator bracket or power steering bracket.
Advertising