Billet Specialties V-Trac Pulley System - Small Block Chevy - Manual (Page 7)

7
Figure 4 - Install Power Steering Pump & Bridge Bracket
If you do not have power steering proceed to Step 2.
STEP 1: Apply anti-seize to the threads of the two 5/16-24 x 3” socket head
cap screws. Place power steering pump and pulley onto bracket and thread
the two 5/16” socket head cap screws with 5/16” lock washers through pump
into bracket and tighten firmly.
STEP 2: Apply anti-seize to the threads of the four 8mm-1.25 x 25mm 12pt.
ARP cap screws. Align bridge bracket mount holes with the four spacer nuts.
Install the four 8mm 12pt. ARP cap screws and tighten firmly.