SCANTECH ID (Champtek company) LG700BT - Manual (Page 12)

4
CHAPTER 2 GENERAL DESCRIPTION
2.1 Use of the LG700BT
The LG700BT is very ergonomic and modern designed and
very user friendly. It can be connected to your POS or
Host system trough a RS232, Keyboard Wedge or USB cable.
To read a bar code, simply press the red trigger button
and aim the beam to the bar code. It needs to position
the beam to fall across all bars in the 1D barcodes. You
will hear one beep and the green LED indicator will light
on after scan successfully.
The programming of the LG700BT is very easy. You can
setup the LG700BT by scan all necessary programming codes
that meet applications. Thanks to the powerful decoding
software, the LG700BT can decode all major 1D codes.