SCANTECH ID (Champtek company) LG700BT - Manual (Page 30)

22
4.8.2 Data/Stop Bits
The number of data/stop bits transmitted for each
character
7 Data Bits
< 8 Data Bits >
< 1 Stop Bits >
2 Stop Bits
4.8.3 Parity
A Parity bit is an extra data bit used to check data
transmission errors.
<None>
Even – Select to set the parity bit
either 1 or 0 to ensure the number
of 1.
Odd – Select to set the parity bit
either a 1 or 0 to ensure the
number of 1.
Mark – Select to set the parity bit
always 1.
Space – Select to set the parity bit
always 0.