SCANTECH ID (Champtek company) LG700BT - Manual (Page 70)

62
Bar Code ID ON
<Bar Code ID OFF>
Default – Return from User Define
to Default
5.1.2 User Define Code ID
To set the code ID
1. Scan the symbologies programming code.
2. Go to the ASCII Table in Appendix B. Scan
programming codes that represent the desired ID.
Note: User define code ID will override default value.
Program will not check the conflict. It is possible to
have more than two symbologies which have same code ID.
UPC-A
UPC-E
EAN-13/JAN-13
EAN-8/JAN-8
CODE 39