SCANTECH ID (Champtek company) NOVA N-4070 - Manual (Page 11)

Installation 5
The specific parts of this scanner are:
1. Sleep/Wake Button - Press this button for 3 seconds, the
scanner manually enters sleep mode.
- When a sleep mode time-out is
programmed, the scanner can be activated
by pressing this button. Moreover, the
scanner may be automatically activated
when any barcodes or objects pass-by the
scanner.
NOTE: The default value for the sleep
mode time-out is set to 10 minutes. When
the scanner is in sleep mode, the LED is
intermittently flashing blue.
2. LED - A blue LED indicates that the scanner is
ready to read a barcode. An orange LED
indicates a good read.
3. Volume Button - The beep is heard whenever data has been
read correctly. The frequency and volume
can be adjusted.
Standard parts & accessories:
Interface Cable - One of various types of cable to connect
the host computer / POS system.
Power Adapter - Power the scanner via the AC power outlet
if the scanner is not directly powered.
1
2
1
3
2
1