SCANTECH ID (Champtek company) NOVA N-4070 - Manual (Page 22)

Installation 16
6. If you are using an external power supply, power on this scanner by
plugging the power supply into an AC power outlet. Switch on the host
system.
IMPORTANT
To activate USB or KBW interface, scan the following codes
from the Configuration Guide:
1. Open the scanner Programming Mode by scanning code1.1.
2. Return to factory default settings by scanning code1.3.
Once this scanner is installed, you can start scanning barcode labels. If you
want to change the default settings of the scanner, proceed to the
Configuration Guide which came with this scanner.
Wall mount installation
To install the bracket on the wall, do the following:
4. Locate an ideal position on the wall.
5. Use the bracket as a template to mark the places for the mounting holes
and drill two holes.
6. Fasten the bracket to the surface with two screws as illustrated in the
figure.