SCANTECH ID (Champtek company) NOVA N-4070 - Manual (Page 24)

Appendices 18
A CONNECTOR TYPES AND PIN DEFINITIONS
This scanner supports four interfaces in one standard unit, includes RS232,
Keyboard Wedge, USB and Powered USB (option). The various pin
definitions for the applicable data port are given on page 17 and 18. The
connector to be used for the port is indicated below.
To activate USB or KBW interface, follow this sequence:
1. Plug in the appropriate interface cable and then power up the
scanner.
2. Scan the following codes from the Configuration Guide:
- Open the scanner Programming Mode by scanning code 1.1
- Return to factory default settings by scanning code 1.3
Pin definitions for multiple interface: Connector: RJ-48, 10 pins
Multiple Interface
RS-232 KBW USB
Powered
USB
Pin Description Description Description Description Remark
1 - - IFID IFID IFID = Interface ID
2 CTS PC-Clock - - -
3 RxD PC-Data - - -
4 TxD KB-Data - - IFID = Interface ID
5 RTS KB-Clock - - -
6 Ground Ground Ground Ground Ground
7 - PC - 5V PC - 5V - -
8 - - - +12V
Direct Power,
may be used to
power scanner
9 -
IFID: connect
to „6‟
D + D +
IFID = Interface ID
D + = USB data
10 - - D - D - D ­ = USB data