GE Industrial Solutions On-line VH Series UPS - Manual (Page 15)

Digital Energy
Modifications reserved Page 15/25
GE_UPS_OPM_VHU_0K7_2K0_XUL_V040.docx Operating Manual VH Series 700 - 1000 -1500 – 2000 VA UL
4 OPERATION
4.1 OPERATING PANEL
Fig. 4.1: Operating panel
switch / LED main function
1 - ‘on’ switch
switches on the UPS, starts quick battery test (see 4.6)
2 - ‘off’ switch
switches off the UPS
3 - LED ‘operation’
on when the UPS is operating
blinks if the UPS is in standby mode
4 - LED ‘on bypass’
on when the UPS operates in bypass mode: the incoming mains power is channeled
directly to the load
5 - LED ‘on battery’
on in case of battery operation: the mains power fails, and the internal batteries
supply the required power until either they are depleted or mains power returns.
6 - LED ‘alarm’
blinks in case of an alarm
7 - LED bar ‘runtime capacity’
the remaining available battery runtime for the actual load, in % of the maximum
runtime with the actual load
8 - LED bar ‘load’
indicates to what extent the output capacity of the UPS is used by the actual load. If
e.g. the 25% and 50% LED are on, the load exceeds 50% of the maximum load. If all
4 LEDs are on the unit operates in overload. As this is an abnormal situation the
alarm LED will blink as well.
More info in section 4.3.2.
3
1
4
5
6
2 7 8