GE Industrial Solutions On-line VH Series UPS - Manual (Page 20)

Digital Energy
Modifications reserved Page 20/25
GE_UPS_OPM_VHU_0K7_2K0_XUL_V040.docx Operating Manual VH Series 700 - 1000 -1500 – 2000 VA UL
4.5 USE: SETUP MODE
The setup mode can only be entered if the UPS is in ‘standby’ -mode: connected to a live wall outlet and switched off (LED
'operation' blinks).
1
Press keypad 'O' and keep it pressed while pressing 'I' simultaneously. Release both buttons.
The setup sequence starts with the setup of the output voltage, indicated by a blinking LED ‘operation’.
2
Scroll through the four functions with keypad 'I', one of the LEDs ‘operation’, ‘on bypass’, ‘on battery’ or ‘alarm’ will
blink, indicating which function has been selected (see fig 4.5).
3
Toggle the setting of the selected function by pressing switch 'O'. The LEDs on the LEDbar ‘runtime capacity’ shows
the setting.
4
Store the new settings and leave the setup mode: press keypad '0' and keep it pressed while pressing 'I'
simultaneously. Release both buttons.
fig. 4.5: Setup menu
*DEFAULT SETTING