GE Industrial Solutions CPS3200U - Manual (Page 13)

The web page reflects the physical configuration of each shelf.
The right hand side shows the 48V input current and alarm states for each of the DC inputs. Text
changes to yellow for power minor and red for power major. Fan tray status is also alarmed on the right
hand side of the figure. The output voltage and current of each circuit on each card is also shown on the
physical representation of the shelf. The ‘a’ circuit output is shown on the top and the ‘b’ circuit output is
shown below. The left hand side of the WEB display shows how circuits are grouped, including group
name, number of circuits assigned, current draw, and current capacity.
[QS941A WEB Interface page 8]
Details about the WEB interface can be found in the QS941A Controller WEB Interface. This pdf
document can be found at the bottom of the CPS2300U page located at:
http://www.power.tycoelectronics.com/Family.aspx?FID=928472a2-742b-46c6-8188-1fbb92e73510
To help find the FTTN relevant information on each tab, please use this guide
(ovals show start links):
Home: >
Think of the FTTN
shelf as protected
power distribution
panel similar to a
circuit breaker
distribution. Estimate
of 48V current is
shown.
Reports: >
FTTN data
is under
these links
TECHNICAL SUPPORT GUIDE CC84885345
CPS3200U, QS982A, QS941A, Upstream Systems 13