GE Industrial Solutions MicroVersaTrip Plus and MicroVersaTrip PM for Allis Chalmers, Siemens_Allis, and Siemens LA-600[F] and LA-1600[F] (Blue) User Manual
GE Industrial Solutions Equipment
INTRODUCTION
GE Conversion Kits are designed for upgrading existing Allis
Chalmers®, Siemens/Allis®, and Siemens®
low-voltage power
circuit breakers, rather than replacing the entire breaker. The
Conversion Kits include MicroVersaTrip Plus™ or MicroVersaTrip
PM™ Trip Units, the latest technological advance in GE trip
systems.
MicroVersaTrip Plus and MicroVersaTrip PM Conversion Kits are
designed and tested to conform to ANSI Standard C37.59,
allowing the retrofitter to properly install the kit and acceptance
test the breaker.
This publication covers installation of MicroVersaTrip Plus and
MicroVersaTrip PM Conversion Kits on Allis Chalmers®,
Siemens/Allis®, and Siemens® LA-600 and LA-1600 (blue) low-
voltage power circuit breakers. Each Conversion Kit contains all
the components needed to convert from the existing trip system.
g
MicroVersaTrip Plus™ and MicroVersaTrip PM™
Conversion Kits
for Allis Chalmers
®
, Siemens/Allis
®
, and
Siemens
®
LA-600[F] and LA-1600[F] (Blue)
Low-Voltage Power Circuit Breakers
DEH–40008 Installation Instructions