GE Industrial Solutions Programmer Disconnect - Manual (Page 5)

4 Programmer Disconnect — Accessory Manual for Retrofil CB DEH-41532 02/12
Figure 3. 19-Pin Programmer Disconnect
on the AKR30/50 Breaker
Figure 4. Wiring for Programmer Disconnect
(12 and 19 Pin)
AKD-5—Programmer Secondary Disconnect (Breaker Side—N/A)
Programmer secondary disconnects are not provided on AKD-5 legacy LVS breakers. If the customer choses to
apply the advanced features of the EntelliGuard ACB, the control wiring needs to be routed from the LVS directly
to the secondary disconnect landing points on the cassette assembly of the EntelliGuard ACB cassette.
AKD-6—19-Pin Programmer Disconnect Overview
The 19-pin programmer disconnects can now be included with the AKD-6 series retrofills to accommodate the
extended features of the EntelliGuard
® Trip Unit. The programmer disconnect is pre-wired before the assembly
leaves the factory. Note that the breaker side wiring itself is done at the factory. The compartment side is installed
and wired in the field by a qualified electrician or installation service company.
AKD-6—Programmer Secondary Disconnect (Breaker Side)
Programmer disconnect assemblies come pre-installed and wired from the factory and do not require any installa-
tion in the field. The photo in
Figure 3 shows the 19-pin programmer-disconnect on the AKR30/50, bottom side of the
breaker—already installed. Figure 4 displays the wiring diagram for the programmer-disconnect (12-pin and 19-pin
are combined in one diagram, although the AKD-6 does not use the 12-pin). Figure 5 features an exploded view of
the 19-pin programmer disconnect. An installed view of the 19-pin programmer disconnect appears in Figure 6 . For
the compartment side, the 19-pin is ordered separately and comes in a box.
Immediately below, are the part numbers for the 19-pin programmer disconnect assemblies, both breaker side and
compoartment side.
BREAKER SIDE P/N 10107108G1 19-PIN PROGRAMMER DISC ASSY AKD6
COMPARTMENT SIDE P/N 10106652G1 19-PIN PROGRAMMER DISC ASSY AKD6
Wiring for programmer 12pin/19pin