GE Industrial Solutions Programmer Disconnect - Manual (Page 7)

6 Programmer Disconnect — Accessory Manual for Retrofil CB DEH-41532 02/12
Figure 7. AKD-6—19-Pin Programmer-Disconnect
Assembly, Compartment Side
Figure 8. Prepare AKD-6—Compartment
Figure 7 shows the exploded view of the 19-pin programmer disconnect for the AKD-6.
To install the programmer disconnect in the AKD-6 switchgear, do the following:
1. Turn off power to the switchgear, if not done already.
2. Have these tools ready for doing the task—hand-drill, cleaning solution, antirust, and wrench for metric
M6 bolt/nut.
Clean the base of the compartment of any dirt or foreign particles, if not done already (Figure 8).