GE Industrial Solutions AF-650 GP MultiPulse Drive Panel - Manual (Page 10)

MULTIPULSE DRIVE PANEL
10 GE Energy ©2012 GE Company All Rights Reserved
3 Operating and Troubleshooting
Instructions
Your AF-600 FP or AF-650 GP MultiPulse Panel
comes with an AF-600 FP or AF-650 GP
Adjustable Frequency Drives respectively from
GE Drives mounted in an enclosure which
contains the following equipment to manually
or automatically allow motor operation
across-the-line in addition to motor operation
from the drive.
ABB

/ Ferraz Shawmut Non-Fused
Disconnect w/through-the-door lockable
handle (or equivalent)
ABB

/ Ferraz Shawmut Fused Disconnect
w/through-the-door lockable handle (optional)
(or equivalent)
GE Spectra RMS
TM Mag-Break Solid State
Circuit Breaker w/through-the-door lockable
handle
GE C-2000
TM 3-Pole Non-Reversing Contactors
GE C-2000
TM Class 20/30 Fixed Heater Motor
Overload Relays
GE C-2000
TM / 104P Selector Switches and
Pilot Lights
GE Type IP Encapsulated or Vacuum
Impregnated Control Power Transformer
w/fuses
Bussman/ Ferraz Shawmut Amp-trap

Time-
Delay Class J Fuses (or equivalent)
GE Line Reactors (optional)
GE Load Reactors (optional)
GE DC Link Reactors internal to Drive
Trenco make Phase shifting transformer
Vishay make Bridge rectifiers
These instructions are intended as a
supplement to the User’s Guide for the AF-600
FP and AF-650 GP drives. For programming,
operating and troubleshooting instructions for
the adjustable frequency drives please refer to
this instruction manual, which is included with
your panel documentation package.
DET - 767
AF- 650 GP Design and
Installation Guide
DET - 618
AF- 650 GP Programming
Guide
DET - 768
AF-600 FP Design and
Installation Guide
DET - 620
AF-600 FP Programming Guide
Also included with your panel documentation
package are installation instructions, electrical
and mechanical drawings of your panel, and a
parts list that includes recommended spares.