GE Industrial Solutions AF-650 GP MultiPulse Drive Panel - Manual (Page 9)

MULTIPULSE DRIVE PANEL
9 GE Energy ©2012 GE Company All Rights Reserved
 All field wiring for tight and proper
connections (no split wire ends that may
come in contact with adjacent connection
points).
 No loose hardware, metal shavings, or
wiring chips.
 All factory wiring for proper tightness that
may have become loose due to shipping
vibration.
2.11 Maintenance Notes
Risk of electric shock, do not attempt to open
the enclosure cover, refer servicing to qualified
personnel
To reduce risk of fire, replacement protectors
(fuses/breakers) should be of the same type
and rating
The panel needs maintenance for trouble free
operation over its lifetime, periodically check
for any insulation break down, enclosure
damage or any other signs of damage and
replace it with same type and rating
Dirt and debris may collect on enclosure
surface, it is recommended to clean the
surface with cleaning agents as needed
Periodically replace/clean the fan filters to
keep the proper amount of air circulation
through the enclosure.
It is recommended that all power connections
to be checked for proper tightness every 6
months due to thermal cycling that may occur
during normal operation.
WARNING: Remove power to the panel
before attempting to open the enclosure
cover.
DANGER
HAZARDOUS VOLTAGE
Turn off all power before working on the
equipment!
Electrical shock will cause severe injury or
death!
WARNING: Do NOT start up and run the
Drive without proper programming. Always
check all the Drive parameters before
connecting and powering up the load.