GE Industrial Solutions 9-36V ProLynx 5A - Manual (Page 3)

GE Data Sheet
9-36V ProLynx TM 5A: Non-Isolated DC-DC Power Modules
9Vdc –36Vdc input; 3Vdc to 18Vdc output; 5A to 2.5A Scaled output current
9Vdc –24Vdc input; -3.3Vdc to -18Vdc output; 5A to 0.7A Scaled output current
July 23, 2013 ©2012 General Electric Company. All rights reserved. Page 3
Electrical Specifications (continued)
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set-point All V
O, set
-2.0 +2.0 % V
O, set
Output Voltage All V
O, set
-2.5 ⎯ +2.5 % V
O, set
(Over all operating input voltage, resistive load, and
temperature conditions until end of life)
Adjustment Range (elected by an external resistor)
(Some output voltages may not be possible depending
on the input voltage – see Feature Descriptions Section) All V
O
3 18 Vdc
Output Regulation
Line (V
IN
=V
IN, min
to V
IN, max
) All ⎯ 0.4 % V
O, set
Load (I
O
=I
O, min
to I
O, max
) All ⎯ 0.4 % V
O, set
Temperature (T
ref
=T
A, min
to T
A, max
) All ⎯ 0.4 % V
O, set
Remote Sense Range All 0.5 Vdc
Output Ripple and Noise on nominal output
(V
IN
=V
IN, nom
and I
O
=I
O, min
to I
O, max
Co = 0.1μF // 10 μF
ceramic capacitors)
Vout=3.3V, Vin=28V
Peak-to-Peak (5Hz to 20MHz bandwidth) All 45 mV
pk-pk
RMS (5Hz to 20MHz bandwidth) All 14 mV
rms
Vout=18V, Vin=28V
Peak-to-Peak (5Hz to 20MHz bandwidth) All 143 mV
pk-pk
RMS (5Hz to 20MHz bandwidth) All 47 mV
rms
External Capacitance 1
Without the Tunable Loop TM
ESR ≥ 1 mΩ All C
O, max
0 ⎯ 47 μF
ESR ≥ 10 mΩ All C
O, max
0 ⎯ 100 μF
With the Tunable Loop TM
ESR ≥ 0.15 mΩ All C
O, max
0 ⎯ 100 μF
ESR ≥ 10 mΩ All C
O, max
0 ⎯ 2000* μF
Output Current (Vo=3V) All I
o
0 5 Adc
Vo=5V All I
o
0 4.7 Adc
Vo=12V All I
o
0 3.5 Adc
Vo=18V All I
o
0 2.5 Adc
Output Current Limit Inception (Hiccup Mode ) All I
O, lim
160 % I
o,max
Output Short-Circuit Current 12Vin 25C All I
O, s/c
2 Adc
(V
O
≤250mV) ( Hiccup Mode ) 28Vin
Efficiency (I
O
=I
O, max ,
V
O
= V
O,set
)
V
IN
= 12Vdc, T
A
=25°C V
O, set
= 3.3Vdc η 91.0 %
V
IN
= 12Vdc, T
A
=25°C V
O, set
= 5Vdc η 93.3 %
V
IN
= 28Vdc, T
A
=25°C V
O,set
= 12Vdc η 94.7 %
V
IN
= 28Vdc, T
A
=25°C V
O,set
= 18Vdc η 95.9 %
Switching Frequency All f
sw
⎯ 300 ⎯ kHz
1 Depending on Input and Output Voltage, external capacitors require using the new Tunable Loop TM feature to ensure that the module is
stable as well as getting the best transient response. See the Tunable Loop TM section for details.
* Larger values may be possible at specific output voltages. Please consult your GE Technical representative for additional details.