GE Industrial Solutions 6KCV301ENC - Manual (Page 5)

5 ———— Digital Encoder Input Expansion and Encoder Repeater ————
6KCV301ENC
1. INTRODUCTION
The 6KCV301ENC card is an AV300i drive option used to add a second
optocoupled encoder input and an encoder repeater to the drive. It is possible
to use only one I/O expansion card per Drive.
This option card features:
- 1 optocoupled digital encoder input
- A / A not +5V or 15V/24V selectable (150kHz max)
- B / B not +5V or 15V/24V selectable (150kHz max)
- C / C not +5V or 15V/24V selectable (150kHz max)
- Encoder qualifier input (QC+ / QC -) 15VDC up to 24VDC
Encoder loss detection is available only when a differential encoder is used
with a 15V – 24VDC power supply
- 1 optocoupled encoder data repeater TTL (@5V) and HTL (@15….24V)
- A / A not +5V and 15V/24V (150kHz max)
- B / B not +5V and 15V/24V (150kHz max)
- C / C not +5V and 15V/24V (150kHz max)
- Encoder qualifier (home position signal) input (QC+ / QC not) 15VDC
up to 24VDC
Encoder repeater has frequency divider functionality selectable between 1,
2, 4, 8 times using hardware jumpers.