Mounting – GE Industrial Solutions 6KCV301ENC User Manual
Page 7
Advertising
7
Digital Encoder Input Expansion and Encoder Repeater
6KCV301ENC
2. MOUNTING
The 6KCV301ENC card is supplied with standoffs and the cable for
connection between regulation and expansion card .
1.
Switch the drive off.
2.
Fasten the 6KCV301ENC card to the drive regulation board by means
of screws (B) and standoffs (A).
3.
The 6KCV301ENC card is connected to the regulator card through the
XH connector using the supplied cable. The power supply (+5V) and the
control signals are provided by the drive via the XH connector.
4.
Switch on the drive.
Advertising