Asus P2-P5945GCX - Manual (Page 31)

2-15 ASUS P1/P2-P5945GCX
Before reinstalling the storage drive assembly, connect the IDE/SATA and power
plugs to the IDE/SATA and power connectors at the back of the drives.
1. Connect the black plug of the IDE cable to the optical drive, then the gray
plug to the hard disk drive. If you have the SATA HDD, connect the SATA
cable to the SATA HD.
2. Connect the 4-pin power plugs to the power connectors at the back of the
drives.
3. Install the storage drive assembly to the chassis.
4. Secure the storage drive assembly with three screws.
Follow these steps to reinstall the storage drive assembly:
R
3
R
4