Asus P2-P5945GCX - Manual (Page 54)

4-10 Chapter 4: Motherboard info
9. System panel connector (6-1 pin PANEL)
Refer to the connector description below for details.
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis
power LED cable to this connector. The system power LED lights up when
you turn on the system power, and blinks when the system is in sleep mode.
• Hard disk drive activity (2-pin HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
R
System Panel Connector
NEL
HD_LED+
PLED+
HD_LED- PLED-
PA