Asus P2-P5945GCX - Manual (Page 48)

4-4 Chapter 4: Motherboard info
2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW78)
Set these jumpers to +5V to wake up the computer from S1 sleep mode
(CPU stopped, DRAM refreshed, system running in low power mode) using
the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep
modes (no power to CPU, DRAM in slow refresh, power supply in reduced
power mode).
• The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
R
USB Device Wake Up
3
2 2
1
USBPW78
+5V
(Default)
+5VSB
3
2 2
1
USBPW34
+5V
(Default)
+5VSB
3 2 2 1
USBPW12
+5V
(Default)
+5VSB