Asus P2-P5945GCX - Manual (Page 51)

4-7 ASUS P1/P2-P5945GCX
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
4. USB connector (5-1 pin USB7)
This connector is for USB 2.0 ports. Connect the USB/GAME module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
The USB module is purchased separately.
3. CPU Fan connector (3-pin CPU_FAN)
The fan connector support cooling fans of 350 mA~740 mA (8.88 W max.) or a
total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the fan cable to the fan
connector on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
R
CPU FAN Connector
CPU_FAN
GND +12V
Tachometer
R
USB7 Connector
USB7
GND
USB LP7+
USB LP7-
USBPW78