Configuring the bmc nic settings – Acer AT310 F1 User Manual
Page 143
Advertising
125
Configuring the BMC NIC settings
You can configure the BMC NIC settings using DHCP or static IP
addressing.
Configuring the BMC NIC settings using DHCP
1
Enter the BIOS setup (see "Entering BIOS Setup" on page 59).
2
Select Server Management menu.
3
Select System Information then press <Enter>.
4
Select BMC IP Address Source then press <Enter>.
5
Select DHCP.
6
Press <F10>.
7
Select Yes to save the modified password and close the Setup
Utility.
Configuring the BMC NIC settings using a static IP address
1
Enter the BIOS setup (see "Entering BIOS Setup" on page 59).
2
Select Server Management menu.
3
Select System Information then press <Enter>.
4
Select BMC IP Address Source then press <Enter>.
Advertising