Acer AT310 F1 - Manual (Page 88)

4 System BIOS 70
SATA Mode
Selection When set to IDE, the SATA controller
disables its RAID and AHCI functions
and runs in the IDE emulation mode.
You will not have access to the RAID
setup utility.
When set to AHCI, the SATA
controller enables its AHCI
functionality. However, its RAID
functions will be disabled and you
will not be able to access the RAID
setup utility at boot time. For more
information on AHCI, refer to the
SATA AHCI Mode BIOS feature.
When set to RAID, the SATA
controller enables both its RAID and
AHCI functions. You are allowed to
access the RAID setup utility at boot
time. IDE
RAID
ACHI
SATA Port
0/1/2/3/4/5 Press <Enter> to configure the advanced HDD.
Type Press the space bar to configure this
parameter. Auto
None
CD-ROM
Other ATAPI
User
Multisector
Transfer Specifies the number of sectors per
block for multiple sector transfers. Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
LBA Mode
Control Enabling the LBA causes Logical Block
Addressing to be used in place of
Cylinders, Heads & Sectors (CHS). Enabled
Disabled
32-bit I/O Enables/disables 32-bit IDE data
transfers. Enabled
Disabled
Parameter Description Options