Acer AT350 F1 - Manual (Page 134)

Appendix A Server management tools 122
5 Select Yes and the selected drive changes from READY to HOTSP.
6 Press <Esc> to return to the Management Menu.
Saving and Exiting the RAID Configuration Utility
1 After performing RAID configuration, initialization and assigning
the hot spare disk, press <Esc> in the Management Menu and
select Yes to exit the RAID Configuration Utility.
2 Press <Ctrl> + <Alt> + <Del> to reboot the server.
3 Now you can start to install the operating system.
MegaRAID SAS 8708EM2 RAID Creation
Configuring MegaRAID SAS 8708EM2
This section briefly shows how to create RAID with MegaRAID SAS
8708EM2.
Entering MegaRAID SAS RAID Configuration Utility
To start MegaRAID SAS RAID Configuration Utility for MegaRAID SAS
8708EM2, press <Ctrl> + <H> when you see the RAID BIOS during POST.
After POST finished, the Adapter Selection page will show on the
screen. Click on Start to launch the configuration menu.
Loading Factory Default Setting
1 In the Configuration menu, select Adapter Properties. The current
adapter settings appear. Click on Next to change the setting.
2 Change the setting of Set Factory Defaults from No to Yes then
click on submit.
3 Press <Ctrl> + <Alt> + <Del> to reboot the server.
Creating a RAID Volume
1 Launch the configuration menu.
2 Select Configuration Wizard
3 Select Add Configuration (default) and click on Next.
4 Select Custom Configuration (default) and click on Next.