Acer AT350 F1 - Manual (Page 96)

4 System BIOS 84
Advanced Chipset Control
This submenu is used to configure the following sub-items:
CPU Bridge Configuration
Onboard LAN
Option ROM
Select Select iSCSI to use iSCSI Option ROMs
to boot the computer using a
network device. Select iSCSI to use
PXE Option ROMs to boot the
computer using a network device. PXE
iSCSI
Boots Graphic
Adapter Boot
Priority This feature allows the user to select
the graphics adapter to be used as
the primary boot device. Onboard VGA
Add-on VGA
Parameter Description Options
QPI Links Speed This feature selects QPI's data
transfer speed. Slow-mode
Full Speed
QPI Frequency
(Available if QPI
Links Speed is set
to Full Speed) This feature is used to select the
desired QPI frequency. Auto
4.800 GT
5.866GT
6.400 GT
QPI L0s and L1 Select Enabled to lower the QPI
power state. L0s and L1 are
automatically selected by the
motherboard. Enabled
Disabled
Memory
Frequency Use this feature to force a DDR3
memory module to run at a
frequency other than what the
system has detected. Auto, Force DDR-
800, Force DDR-
1066, Force DDR-
1333, and Force
SPD
Parameter Description Options