Xylem pHotoFlex/pHotoFlex Turb - Manual (Page 21)

pHotoFlex / pHotoFlex Turb Commissioning
21 ba75491d04 07/2006
3.4 Initial commissioning
Perform the following activities:
! For
– accumulator operation: insert the accumulator pack (see
section 5.1.2)
– line power operation and charging the accumulator pack: connect
the power pack (see section 3.2)
– operation with LabStation: connect the LabStation and place the
pHotoFlex (Turb) in the LabStation (see section 3.3)
! Switch on the meter (see section 4.1)
! Set the language as necessary (see section 4.3.3)
! Set the date and time as necessary (see section 4.3.4)
Note
When you set the language, date and time according to the mentioned
sections of this operating manual you will quickly become familiar with
the simple operation of the pHotoFlex (Turb).