Xylem pHotoFlex/pHotoFlex Turb - Manual (Page 75)

pHotoFlex / pHotoFlex Turb Operation
75 ba75491d04 07/2006
4.9.4 Transmitting data
The following table shows which data are transmitted to the interface in
which way:
Note
With the <PRT> key you output the data that is being shown on the dis-
play to the interface (displayed measured values, stored measurement
datsets, calibration record).
12 Unit of 11 ! °C / °F
! nm
13 Measured value
status of 11 VALID, INVALID, UFL, OFL
Data Operation / description
Current
measured value ! Press <PRT>.
! Simultaneously with every manual storage
process.
Stored measured
values ! Display stored dataset and press <PRT>.
! All datasets according to the filter criteria via
the RS232 download function
(see section 4.8.2).
Calibration record
(pH electrode) ! Calibration record of a pH electrode with
<PRT> (after calling up from the storage or at
the end of a calibration).
! Calibration record of a pH electrode at the
end of a calibration procedure is printed au-
tomatically.
Data Description