John Wood Envirosense Power Direct Vent (prior to May 2010) - Manual (Page 32)

32
3. adjusting the Operating Set Point
The Operating Set Point of this water heater determines the regulated
temperature for the water in the tank. This parameter is adjusted in the
Temperature menu. Items in this menu allow you to monitor different
temperature readings in the tank along with adjusting the Operating Set
Point.
actIon:
From the desktop screen, press Menu.
dIsplaY:
2. operating states
In the main desktop screen, there are some specific Operating States that
are indicated on the status line. These are summarized below:
actIon:
From the Main Menu, press select to enter the "Temperatures" screen.
dIsplaY:
actIon:
Press
change then use the up and down buttons to change the Set
Point.