Setting and using the water heater, Warning – John Wood Noritz N-069M_N-069S User Manual
Page 16
Advertising
16
3
Mix for desired temperature.
The factory temperature setting is 120
°F (fixed). Mix with cold water with a mixing valve
or at the fixture for desired temperature.
To prevent scalding.
Check the temperature of the running hot
water before using. Temperatures above
125
°F can scald instantly.
1
Check that electrical power is connected.
2
4
How to Use (Not using the remote controller)
Setting and Using the Water Heater
Tempera
ture
If you want to the temperature to be changed to 130
°F or 140°F, contact the installer or Noritz.
Turn on hot water.
Turn off the hot water.
WARNING
High Temperature
The electrical power does not need to
be disconnected between uses.
Hot w
ater
Wa
ter
scalding.
scalding.
Advertising