Extron Electronics CrossPoint Plus Matrix Switchers 84, 88, 124, 128, 168, 1616 HV and HVA - Manual (Page 11)

1-5 CrossPoint Plus Matrix Switchers • Introduction
Operational flexibility — Operations such as input/output selection, setting of
presets, and adjustment of audio levels can be performed on the front panel
or over the RS-232/RS-422 link. The RS-232/RS-422 link allows remote
control via a PC, RS-232 capable PDA, or control system.
• QuickSwitch Front Panel Controller (QS-FPC™) — The CrossPoint Plus
series QS-FPC feature supports touch-of-a-button input and output selection,
preset creation and selection, and audio gain and attenuation control.
• Windows-based control program — Extron’s Windows-based control
program provides a versatile range of operational options with its graphical
interface and drag-and-drop/point-and-click operation. The Windows-based
control program also has an emulation mode that lets you create a switcher
configuration file at the home office and then download it for use by the
switcher on site.
• Simple Instruction Set (SIS™) — The remote control protocol uses Extron’s
SIS for easy programming and operation.
Audio gain/attenuation — Users can set the input level of audio gain or
attenuation (-15dB to +9dB) via the RS-232/RS-422 link or from the front
panel. Individual input audio levels can be adjusted so there are no
noticeable volume differences between sources (figure 1-3).
Audio
inputs
Audio
inputs
VCR
No noticeable volume
differences between sources
Audio system
CD jukebox
CrossPoint Plus Series switcher
I/O CONTROL
CROSSPOINT Plus MATRIX SERIES SWITCHER with DSVP TM
0
-3
-6
-9
-12
-15
Low audio
output level
3
6
9
12
15
+4
+1
-2
-5
-8
-12
+7
+10
+13
+16
+19
VU dBu
0
-3
-6
-9
-12
-15
Output
level
3
6
9
12
15
+4
+1
-2
-5
-8
-12
+7
+10
+13
+16
+19
VU dBu
0
-3
-6
-9
-12
-15
High audio
output level
3
6
9
12
15
+4
+1
-2
-5
-8
-12
+7
+10
+13
+16
+19
VU dBu
Figure 1-3 — Audio gain and attenuation
Global presets — 16 memory presets are a time-saving feature that lets you set up
and store input/output configurations in advance and then recall those
configurations when needed with a few simple steps.