Extron Electronics CrossPoint Plus Matrix Switchers 84, 88, 124, 128, 168, 1616 HV and HVA - Manual (Page 30)

Operation, cont’d
CrossPoint Plus Matrix Switchers • Operation 3-10
Example 4: View video and audio, audio-only, and video-only ties
See figure 3-9, figure 3-10, figure 3-11, and figure 3-12 and the following steps for an
example of viewing the video and audio, audio-only, and video-only ties in the
current configuration.
Example 4 shows the process of viewing the current configuration after the
steps in Examples 1, 2, and 3 have been performed.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
ESC
VIEW
A
B
C
RGBHV AUDIO
C
LED key: = off, = on,
= flash once F
F
2 7 6 5
Press
Press
Press
Press
Figure 3-9 — Example 4: Viewing the current configuration, no input
selected
A Press and release the Esc button. The Esc LED flashes once.
B Press and release the View button to enter view-only mode. The View LED
lights. With no input LED selected, all output LEDs that have no established
ties light.
C
To select both video and audio for viewing, if necessary, press and release the
RGBHV and Audio buttons until the RGBHV LED and Audio LED light.
With no input LED selected, all output LEDs that have no established ties
light.
D Press and release the input 5 button (figure 3-10). The input 5 LED lights.
If ties are established for input 5, all output LEDs toggle; outputs with no ties
turn off and the LEDs associated with all outputs tied to input 5 (audio, video,
or audio and video ties) light. If no ties are established for input 5, all output
LEDs turn off.
If audio is broken away, the Audio LED blinks.
1
1
2
2
3
3
4
4
5
5
6
INPUTS
ENTER
OUTPUTS
6
7
7
8 9 10 11
PRESET VIEW ESC RGBHV AUDIO
12
8
CONTROL I/O
D
RGBHV AUDIO
B LED key: = off, = on, = blinking
1 8 4 3
D
5
D
B
Press
Figure 3-10 — Example 4, step d: Viewing the current configuration,
video and audio