Extron Electronics CrossPoint Plus Matrix Switchers 84, 88, 124, 128, 168, 1616 HV and HVA - Manual (Page 49)

4-7 CrossPoint Plus Matrix Switchers • Programmer’s Guide
Command/response table for SIS commands (Cont’d)
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Reset all mutes Esc zZ ZapZ Unmute all outputs.
Reset whole switcher Esc zXXX ZapXXX Clears all ties and global presets,
the RGB delay, the I/O grouping,
and resets all audio gains to 0dB.
View ties, gain, mutes, and presets
View video output tie V/v X2 % Out X2 •In X3 •Vid
Example: v7% Out07•In02•Vid Output 7 video tied to input 2
video.
View audio output tie V/v X2 $ Out X2 •In X3 •Aud
Example: V3$ Out03•In06•Aud Output 3 audio tied to input 6
audio.
View gain for input V/v X1 G In X1 •Aud= X9
Example: v4G In04•Aud=-02 Gain for input #4 is -2dB.
View all output mutes VM/vm X12 •(up to 16)Mut Each position listed in the
response is an output, left =
output 1, right = n (n = the
maximum number of outputs for
this model).
Example 2 (CrossPoint Plus 168): VM 0•1•0•2•0•3•0•0•Mut
View preset configuration V/v X10 . X3 •(up to 16)•Vid• X3 •(up to 16)•Aud
Each position listed in the response is an output, left = output 1, right= output n (n is the
maximum number of outputs). The number in each position is the input tied to the output
represented by that position.
Response description: Input# (I#) assigned to output# (O#)1•I# to O#2...I# to O#n•Vid•I# to O#1•I# to O#2...I# to O#n•Aud
Example
2 (CrossPoint 128 Plus HVA): V0. Preset #0 is current configuration.
01 Output:
Response = tied input:
Video input 8 tied to output 2
02 03 04 05 06 07 08
08•08•08•08•07•09•11•03•Vid•05•05•05•05•07•09•11•00•Aud
01 02 03 04 05 06 07 08
No tied audio input Audio input 5 tied to output 2
Video = Input (I) 8 is tied to outputs (O) 1–4; I7— O5; I9 — O6; I11 — O7; I3 — O8.
Audio = The same as video except that input 5 is tied to outputs 1–4 and no input is tied to output 8.
Information requests
Information request I/i V X1 X X2 •A X1 X X2 •Exe X13 V X1 X X2 = V size, A X1 X X2 = A Size.
Example: i V16X16•A16X16•Exe0 16 Video & 16 Audio inputs and
outputs, front panel unlocked.
Request part number N/n Nxx-xxx-xx See appendix A for part #s.
Example: N N60-332-06 CrossPoint Plus 1616HVA part #
is 60-332-06.
Query software version Q/q Ver X14
Example: Q Ver2.00 The value shown is an example
only.
2 HV models do not display audio configuration or mutes, and the number of outputs shown varies with the number of
video or audio outputs.